efa system settings
update
Configures the schedule for automatic
database backups and determines the maximum number of backup and supportsave files to save
before they are deleted.
Syntax
efa system settings
update
[--backup-schedule
time
|--max-backup-files
num
|--max-supportsave-files
num
|--remote-server-ip
ip/ipv6 |--remote-transfer-protocol
{
ftp | scp
} |
--remote-server-username
name |--remote-server-password
password
|--remote-server-directory
directory
|--periodic-device-config-backup
{ Enabled | Disabled
}
]
Parameters
- --backup-schedule
time
- Specifies the schedule for periodic,
automatic backups, in the format HOUR:DOM:MON:DOW (hour, day of month,
month, day of week).
- --max-backup-files
num
- Specifies the maximum number of backup files
to keep. As new backup files are created, older backup files in excess of
this value are deleted. The range of values is 2-20. The default is 5.
- --max-supportsave-files
num
- Specifies the maximum number of supportsave
files to keep. As new supportsave files are created, older files in excess
of this value are deleted. The range of values is 2-20. The default is
5.
- --remote-server-ip
ip
- Specifies the remote server IP where backup
is copied. IP address can be either IPv4 or IPv6.
- --remote-transfer-protocol
{
ftp |
scp
}
- Specifies a valid transfer protocol.
- --remote-server-username
name
- Specifies the remote server
user name.
- --remote-server-password
password
- Specifies the remote server password. The
default is "<prompt>".
- --remote-server-directory
directory
- Specifies the remote server
directory where backup is copied.
- --periodic-device-config-backup
{
Enabled |
Disabled
}
- Specifies whether to include
device configuration backup in periodic backup. Default is No.
Usage Guidelines
The settings described here enable you to configure details of the remote server where the
backup is copied. Use the
efa system settings reset command to remove settings.
Note
The details of the remote server
are verified before configuring the remote parameters. If you specify a value
for any
one of the
following, you must also specify values for
all the others:
remote-server-ipremote-server-usernameremote-server-passwordremote-server-directory
If the four values have already been set, they are retained in the
database. If you then modify any one of them, the other values are
used.
Examples
efa system settings update --remote-server-ip 10.20.255.177 --remote-server-username extreme
--remote-server-password password --remote-server-directory efa/backup
Setting Update Successful
efa system settings update --remote-server-ip 10.20.255.177
Error: Remote server settings missing or incomplete
efa system settings update --remote-server-username extreme
Error: Remote server settings missing or incomplete
efa system settings update --remote-server-ip 10.20.241.7
--remote-server-username root --remote-server-password pass
--remote-server-directory /root/vinod/ --remote-transfer-protocol scp
Setting Update Successful
--- Time Elapsed: 148.800033ms ---
